Tyvek / Tyvek® 400

TY125S WH

Tyvek® 400

DuPont™ Tyvek® 400 Coverall. Comfort Fit Design. Collar. Elastic Wrists and Ankles. Elastic Waist. Serged Seams. White.

 
 
 
Hover over image to zoom
Name Description
Full Part Number TY125SWHxx002500
Fabric / Material Tyvek® 400
Design Coverall w/ Elastic Wrists and Ankles
Seam Serged
Color White
Quantity/Box 25 per case

FEATURES & PRODUCT DETAILS

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.
  • Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
  • Laydown collar
  • Elastic opening for tighter fit at wrist
  • Elastic opening for tighter fit at ankle

FINISHED DIMENSIONS

ADDITIONAL EQUIPMENT NEEDED

Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Basis Weight ASTM D3776 1.2 oz/yd2
Breaking Strength - Grab (CD) ASTM D5034 22 lbf/in
Breaking Strength - Grab (MD) ASTM D5034 18 lbf/in
Burst Strength - Mullen ASTM D774 50 psi
Hydrostatic Head AATCC 127 45 inches H2O
Seam Strength ASTM D1683 > 19 lbf
Surface Resistivity (25°C / 55& RH) ASTM D257 < 6.3 x 10^9 ohms/square
Thickness ASTM D1777 5.9 mils
Wearing Apparel Flammability 16 CFR 1610 Help Class 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation

Warnings