Tyvek
/ DuPont™ Tychem® 6000 SFR
FS0127TLT00
DuPont™ Tychem® 6000 SFR
DuPont™ Tychem® 6000 SFR Coverall. Respirator Fit Hood. Front Zipper Closure. Chin Flap. Double Storm Flap.Elastic Face Opening. Elastic Wrists. Elastic Ankles. Elastic Waist. Taped Seams. Pin Lock Zipper. Light Tan.
- FAQ
-
DOUBLE CHECK
Use Double Check to determine if this product is suitable for your hazard scenario.
- Where to Buy
Frequently Asked Questions
FS0127TLT00
DuPont™ Tychem® 6000 SFR
In what ways can I manage or prevent heat stress?
Chemical protective clothing can interfere with the natural regulation of body temperature. This can lead to a rise in core body temperature and heat stress. Implementing a conservative work/rest schedule or using a cooling system may be effective in reducing heat stress. (Note: Do not wear cooling vests in potentially flammable or explosive environments.) .)
Be aware of the symptoms and treatment of heat stress. If you or your co-workers have symptoms of heat stress such as nausea, dizziness, high heart rates, or excessive heat build-up, leave the work area immediately and remove the ensemble as quickly as possible after decontamination and seek professional care.
The maximum length of time the chemical protective clothing can be worn depends on variables such as the air supply, ambient conditions, climate inside the ensemble, physical and psychological conditions of the wearer, work rate and work load. The TLV® pocket guide from the American Conference of Governmental Industrial Hygienists (ACGIH, Cincinnati) provides corrected heat stress limits for some garments. Similar information is available on the federal OSHA web site (www.OSHA.gov). The WBGT correction factor for chemical protective garments is at least 10°C or higher for chemical garments made of impervious films (such as Tychem® garments) and covering the entire body (hooded coverall or encapsulating designs). For Tyvek® coveralls, the WBGT correction factor is 2°C with a hood and 1°C without a hood.
Be aware of the symptoms and treatment of heat stress. If you or your co-workers have symptoms of heat stress such as nausea, dizziness, high heart rates, or excessive heat build-up, leave the work area immediately and remove the ensemble as quickly as possible after decontamination and seek professional care.
The maximum length of time the chemical protective clothing can be worn depends on variables such as the air supply, ambient conditions, climate inside the ensemble, physical and psychological conditions of the wearer, work rate and work load. The TLV® pocket guide from the American Conference of Governmental Industrial Hygienists (ACGIH, Cincinnati) provides corrected heat stress limits for some garments. Similar information is available on the federal OSHA web site (www.OSHA.gov). The WBGT correction factor for chemical protective garments is at least 10°C or higher for chemical garments made of impervious films (such as Tychem® garments) and covering the entire body (hooded coverall or encapsulating designs). For Tyvek® coveralls, the WBGT correction factor is 2°C with a hood and 1°C without a hood.
What are the donning and doffing instructions for Tychem® 6000 SFR coveralls?
Please refer to the Section on Donning and Doffing Non-Encapsulating Garments in the Tychem® User Manual - Non-Encapsulated.
Permeation The concentration of my hazard is HIGHER than what is listed in the "Search Hazards" box. What should I do?
If the concentration of your hazard is HIGHER than the hazard concentration listed in the hazard search box, you can NOT use the data for the lower concentration hazard. This data will not give you an accurate assessment of suitable garments. Please Contact Us for assistance.
How are Tychem® 6000 SFR garments different from Tychem® 6000 FR garments?
Tychem® 6000 SFR garments are secondary flame-resistant garments, while Tychem® 6000 FR garments (discontinued effective 1H 2024) were primary flame-resistant garments.
Tychem® 6000 SFR garments provide only secondary flame resistance and must always be worn over appropriate primary flame-resistant protective clothing in an environment that requires flame protection, along with other personal protective equipment that protects your head, face, hands and feet. In addition, for Tychem® 6000 SFR hooded garments, a primary flame-resistant hood/balaclava should be worn.
Tychem® 6000 FR garments (discontinued effective 1H 2024) were primary FR garments, designed to provide stand-alone protection from flame and arc exposures.
Tychem® 6000 SFR fabric offers a similar level of chemical protection to Tychem® 6000 FR fabric, providing at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents, toxic industrial chemicals, and flammable organic solvents.
Tychem® 6000 SFR garments provide only secondary flame resistance and must always be worn over appropriate primary flame-resistant protective clothing in an environment that requires flame protection, along with other personal protective equipment that protects your head, face, hands and feet. In addition, for Tychem® 6000 SFR hooded garments, a primary flame-resistant hood/balaclava should be worn.
Tychem® 6000 FR garments (discontinued effective 1H 2024) were primary FR garments, designed to provide stand-alone protection from flame and arc exposures.
Tychem® 6000 SFR fabric offers a similar level of chemical protection to Tychem® 6000 FR fabric, providing at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents, toxic industrial chemicals, and flammable organic solvents.
Can Tychem® 6000 SFR garments be used as primary flame-resistant (FR) garments?
No. Primary flame-resistant (FR) garments, such as those made with DuPont™ Nomex® Essential (Nomex® IIIA) fabric, can be worn alone to provide the necessary level of protection from a flame/thermal threat. Garments made of Tychem® 6000 SFR fabric are not substitutes for primary flame-resistant protective garments. DuPont™ Tychem® 6000 SFR garments provide only secondary flame-resistant protection and are engineered to be worn over primary flame resistant / thermal protective garments to provide barrier protection from a broad range of chemicals including chemical warfare agents, toxic industrial chemicals, and flammable organic solvents while not contributing to burn injury in the event of a flash fire. They must always be worn over an appropriate primary flame-resistant garment in an environment that needs flame protection, along with other personal protective equipment that protects your face, hands, and feet. In addition, for Tychem® 6000 SFR hooded garments, a primary flame-resistant hood/balaclava should be worn.
How should Tychem® 6000 SFR garments be stored?
Store Tychem® 6000 SFR garments in a cool, dark, dry location free of dirt and insects. Sunlight, ozone, high temperatures (>120° F ; 49° C), vehicle exhaust fumes, compression under heavy weights and sharp edges or projections are some conditions known to degrade the materials in these garments.
Store Tychem® 6000 SFR garments in boxes, in bags or on hangers. Never step on protective garments. Never place or store heavy objects on top of protective garments.
Store Tychem® 6000 SFR garments in boxes, in bags or on hangers. Never step on protective garments. Never place or store heavy objects on top of protective garments.
How are Tychem® 6000 SFR garments different from Tychem® 6000 garments?
Tychem® 6000 SFR garments provide broad chemical protection and secondary flame-resistance for use in environments where chemical splash and flash fire dual hazards exist. They must always be worn over appropriate primary flame-resistant protective clothing in an environment that requires flame protection, along with other personal protective equipment that protects your head, face, hands and feet. In addition, for Tychem® 6000 SFR hooded garments, a primary flame-resistant hood/balaclava should be worn.
Tychem® 6000 SFR fabric offers a similar level of chemical barrier protection to Tychem® 6000 fabric, providing at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents and toxic industrial chemicals.
On the contrary, Tychem® 6000 garments provide broad chemical protection however they are NOT flame-resistant and should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Tychem® 6000 garments will burn and possibly melt if exposed to a fire or electric arc flash; this may increase burn injuries even when worn over garments made of Nomex® or any other flame-resistant fabric.
Tychem® 6000 SFR fabric offers a similar level of chemical barrier protection to Tychem® 6000 fabric, providing at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents and toxic industrial chemicals.
On the contrary, Tychem® 6000 garments provide broad chemical protection however they are NOT flame-resistant and should not be used around heat, flames, sparks or in potentially flammable or explosive environments. Tychem® 6000 garments will burn and possibly melt if exposed to a fire or electric arc flash; this may increase burn injuries even when worn over garments made of Nomex® or any other flame-resistant fabric.
Is it possible to wash and re-use Tychem® 6000 SFR garments?
Tychem® 6000 SFR garments should not be cleaned or laundered; dispose of them after use if contaminated.
What determines if the garment is contaminated ?
The decision on whether or not a garment has been contaminated is made by local managers responsible for PPE based on an analysis of the incident in which the garment was used. This analysis may include exposure time, chemicals involved, level of exposure, proximity to the actual release, tasks performed and environmental monitoring in the area in which the garment was worn. Garments that are damaged, altered or show signs of contamination, such as discoloration, odor, stiffening or cracks, should not be used.
What is the shelf life of Tychem® 6000 SFR garments?
Tychem® garments may be used for 5 years from the date of manufacture as long as all of the following conditions are met:
- The garment has been stored properly (view storage conditions)
- The garment has not been damaged, altered or contaminated
- The garment passes a full visual inspection (view garment inspection instructions)
What is the difference between primary and secondary flame resistant (FR) garments?
Primary flame-resistant garments are designed to provide stand-alone protection from flame and arc exposures. Common examples are garments made with DuPont™ Nomex® Essential (Nomex® IIIA). Primary flame-resistant garments selected based on the hazard analysis can provide protection from burn injury in the event of an industrial fire or electric arc exposure even when worn alone.
Secondary flame-resistant garments are made with fabrics that are designed to self-extinguish with no or short after-flame once the flame/heat source is removed. Secondary flame-resistant garments are not expected to contribute to additional burn injury if exposure to heat and flame occurs when worn over an appropriate primary flame-resistant garment. Secondary flame-resistant garments like ProShield® 6 SFR, Tyvek® 400 SFR, Tychem® 2000 SFR, and Tychem® 6000 SFR are not expected to provide the wearer any protection from burn injury in the event of a flash fire when worn stand-alone without primary flame-resistant garments underneath.
Secondary flame-resistant garments are made with fabrics that are designed to self-extinguish with no or short after-flame once the flame/heat source is removed. Secondary flame-resistant garments are not expected to contribute to additional burn injury if exposure to heat and flame occurs when worn over an appropriate primary flame-resistant garment. Secondary flame-resistant garments like ProShield® 6 SFR, Tyvek® 400 SFR, Tychem® 2000 SFR, and Tychem® 6000 SFR are not expected to provide the wearer any protection from burn injury in the event of a flash fire when worn stand-alone without primary flame-resistant garments underneath.
What is the ambient working temperature range for Tychem® 6000 SFR garments?
Tychem® garments can be worn in ambient temperatures of -13°F (-25°C) to 165°F (74°C).
In colder environments, Tychem® garments can become stiff. If cold enough, the fabric may even become brittle. Please be aware that the heat stress of the wearer becomes a greater concern in higher ambient temperatures. At higher temperatures, chemical hazards can become more aggressive. Breakthrough times and permeation rates may change at higher temperatures. The published permeation data per ASTM F739 is performed at ambient temperatures (approximately 72-81° F ; 22-27° C).
Caution: Tychem® fabrics offer little or no thermal insulation to protect the wearer's skin from prolonged exposure to hot or cold.
In colder environments, Tychem® garments can become stiff. If cold enough, the fabric may even become brittle. Please be aware that the heat stress of the wearer becomes a greater concern in higher ambient temperatures. At higher temperatures, chemical hazards can become more aggressive. Breakthrough times and permeation rates may change at higher temperatures. The published permeation data per ASTM F739 is performed at ambient temperatures (approximately 72-81° F ; 22-27° C).
Caution: Tychem® fabrics offer little or no thermal insulation to protect the wearer's skin from prolonged exposure to hot or cold.
What is secondary flame-resistant (SFR) protective clothing?
Secondary flame-resistant (SFR) protective clothing is made with fabrics that are designed to self-extinguish with no or short after-flame once the flame/heat source is removed. Secondary flame-resistant protective clothing must always be worn over appropriate primary flame-resistant protective clothing in an environment that requires flame protection, such as garments made with DuPont™ Nomex® Essential (Nomex® IIIA) or Nomex® Comfort fabric, along with other personal protective equipment that protects your head, face, hands and feet. Secondary flame-resistant garments are not expected to contribute to additional burn injury if exposure to heat and flame occurs when worn over an appropriate primary flame-resistant (FR) garment. Secondary flame-resistant garments are not expected to provide the wearer any protection from burn injury in the event of a flash fire when worn stand-alone without primary flame-resistant garments underneath.
Secondary flame-resistant protective garments like ProShield® 6 SFR, Tyvek® 400 SFR, Tychem® 2000 SFR, and Tychem® 6000 SFR are designed to provide protection against particulate and/or liquid chemical hazards, while not negatively impacting the burn performance of the primary FR garments worn underneath. When selecting a secondary flame-resistant (SFR) protective garment, it is important to examine both the flame-resistant (FR) requirements and perform a hazard assessment for hazardous and nonhazardous particles, liquids, or chemicals. Visit DuPont™ SafeSPEC™ to learn more about the DuPont SFR garment portfolio and the specified hazards they help protect against.
Secondary flame-resistant protective garments like ProShield® 6 SFR, Tyvek® 400 SFR, Tychem® 2000 SFR, and Tychem® 6000 SFR are designed to provide protection against particulate and/or liquid chemical hazards, while not negatively impacting the burn performance of the primary FR garments worn underneath. When selecting a secondary flame-resistant (SFR) protective garment, it is important to examine both the flame-resistant (FR) requirements and perform a hazard assessment for hazardous and nonhazardous particles, liquids, or chemicals. Visit DuPont™ SafeSPEC™ to learn more about the DuPont SFR garment portfolio and the specified hazards they help protect against.
Are Tychem® 6000 SFR garments anti-static or static dissipative?
The substrate used to make Tychem® 6000 SFR garments is treated with a topical antistatic agent to help minimize static build up and reduce nuisance garment cling.
In situations where static dissipation level is a critical performance property, end-users should evaluate the performance of their entire ensemble as worn including outer garments, inner garments, footwear and other PPE. In order for any garment system to be static dissipative, it must be able to drain a charge buildup through proper grounding devices, such as, but not limited to, workstation grounding clips or static-dissipative floors.
Under certain conditions, such as cold and dry weather, it is possible that garments might build and discharge static electricity. Discharges are not normally dangerous except in situations where the generation of an electrical spark could ignite a flammable atmosphere or startle the wearer. When operating around flammable chemicals, take steps to eliminate potential static discharges. In these situations, suggested steps include, but not limited to, water spray, the use of an overcover, raising humidity level of the work area, use of a commercial, anti-static application coating, grounding straps on equipment and personnel, inherently static-dissipating under- and over-garments, and testing of the worker's static dissipation before entry into the classified area.
However, in the case of explosive or flammable atmospheres, even if steps are taken to manage static formation and dissipate static charge, the risk of severe injury remains if an uncontrolled or accidental ignition occurs. Do not wearTychem® 6000 SFR chemical protective garments in potentially flammable or explosive atmospheres. Do not knowingly enter an environment in which the concentration of flammable gas is within flammable or explosive limits while wearing a Tychem® 6000 SFR garment. If you determine that you are in a potentially flammable or explosive environment, retreat immediately.
In situations where static dissipation level is a critical performance property, end-users should evaluate the performance of their entire ensemble as worn including outer garments, inner garments, footwear and other PPE. In order for any garment system to be static dissipative, it must be able to drain a charge buildup through proper grounding devices, such as, but not limited to, workstation grounding clips or static-dissipative floors.
Under certain conditions, such as cold and dry weather, it is possible that garments might build and discharge static electricity. Discharges are not normally dangerous except in situations where the generation of an electrical spark could ignite a flammable atmosphere or startle the wearer. When operating around flammable chemicals, take steps to eliminate potential static discharges. In these situations, suggested steps include, but not limited to, water spray, the use of an overcover, raising humidity level of the work area, use of a commercial, anti-static application coating, grounding straps on equipment and personnel, inherently static-dissipating under- and over-garments, and testing of the worker's static dissipation before entry into the classified area.
However, in the case of explosive or flammable atmospheres, even if steps are taken to manage static formation and dissipate static charge, the risk of severe injury remains if an uncontrolled or accidental ignition occurs. Do not wearTychem® 6000 SFR chemical protective garments in potentially flammable or explosive atmospheres. Do not knowingly enter an environment in which the concentration of flammable gas is within flammable or explosive limits while wearing a Tychem® 6000 SFR garment. If you determine that you are in a potentially flammable or explosive environment, retreat immediately.
Permeation The concentration of my hazard is LOWER than what is listed in the "Search Hazards" box. What should I do?
If the temperature of your hazard is LOWER than the hazard listed in the hazard search box, go ahead and select the higher temperature hazard as long as the physical phase (solid, liquid or gas/vapor) is the same. Because chemical hazards become more aggressive with increasing temperatures, selecting a higher temperature chemical hazard will lead to a more conservative result.
In what ways can I dispose of Tychem® 6000 SFR garments?
In the United States, if not contaminated with chemical or biological hazards, Tyvek® 400 SFR garments can be recycled for non-hazardous applications through the Tyvek® Protective Apparel Recycling Program. Contact DuPont Personal Protection Customer Service at 1-800-931-3456 for information.
Tyvek® 400 SFR garments may be landfilled or incinerated in accordance with local regulations. Uncontaminated chemical protective garments may be incinerated in a facility that is capable of handling mixtures containing plastics. Likewise, an uncontaminated chemical protective garment may be buried in a facility that accepts plastic materials.
Contaminated garments that cannot be handled safely without protective equipment must be disposed of with other hazardous wastes, either through incineration or landfill per local regulations. Before discarding, cut off a sleeve or a leg so the garments cannot be worn again as protective clothing.
Tyvek® 400 SFR garments may be landfilled or incinerated in accordance with local regulations. Uncontaminated chemical protective garments may be incinerated in a facility that is capable of handling mixtures containing plastics. Likewise, an uncontaminated chemical protective garment may be buried in a facility that accepts plastic materials.
Contaminated garments that cannot be handled safely without protective equipment must be disposed of with other hazardous wastes, either through incineration or landfill per local regulations. Before discarding, cut off a sleeve or a leg so the garments cannot be worn again as protective clothing.
Where can I find a SDS (Safety Data Sheet) for Tychem® 6000 SFR garments?
Safety Data Sheets (SDS) are written in accordance with applicable federal regulations, 29 CFR 1910.1200, to communicate health and safety data on usage and handling of hazardous chemicals. Under this regulation, DuPont™ Tyvek®, ProShield®, and Tychem® materials and garments are defined as articles, not chemicals, and the SDS and labeling requirements in that standard do not apply.
Why isn’t there a claim made re: NFPA 701: Standard Methods of Fire Tests for Flame Propagation of Textiles and Films for this garment?
NFPA 701 is only appropriate for textile materials used in furnishings such as curtains, draperies or window treatments; or for decorative purposes, awnings, tents, tarps and banners, this standard is not appropriate to asses “FR” performance of clothing.
Will Tychem® 6000 SFR fabric burn?
When exposed to a flame, the Tychem® 6000 SFR fabric will shrink away. In the event that a flash fire occurs, Tychem® 6000 SFR garments will not contribute to additional burn injury if appropriate primary flame-resistant personal protective equipment is worn beneath. When the flame source is removed, the Tychem® 6000 SFR fabric will self-extinguish with no or short after-flame. However, garments made of Tychem® 6000 SFR must not be used alone in areas where protection from fire or electric arc is required. They are designed to be worn over primary FR garments and ensembles.
I’m not in an environment that needs FR clothing. Can I still wear Tychem® 6000 SFR garments?
Yes, if Tychem® 6000 SFR is suitable for use for the specified chemical hazard, it can be worn. Tychem® 6000 SFR garments provide at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents, toxic industrial chemicals, and flammable organic solvents. However, if flame hazard is not present, Tychem® 6000 garments can be used instead. Tychem® 6000 fabric offers a similar level of chemical barrier protection to Tychem® 6000 SFR fabric.
Do Tyvek® 6000 SFR garments meet ANSI/ISEA 101 sizing standards?
No. Tychem® 6000 SFR coveralls do not meet ANSI/ISEA 101 sizing standards. For specific sizing dimensions on a particular DuPont garment, please view the Product Details tab for that garment.
Are Tychem® 6000 SFR garments latex free?
After January 2023, all DuPont Personal Protection product styles are manufactured under specifications that exclude components containing natural rubber latex.
Tyvek® 500, Tyvek® 600, Tyvek® 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
Tyvek® 500, Tyvek® 600, Tyvek® 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
DUPONT™ SAFESPEC™ Terms of Use
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tool (“Tool”) is intended to assist in choosing protective clothing styles for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment (“PPE”), such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required. Supplying the proper hazard/chemical and exposure information for your hazard scenario is critical in order to obtain suggestions of possible garment options for your consideration. Inaccurate information could result in improper suggestions. Since there are other factors involved which could affect the final PPE decision and may not be considered in this Tool, the final decision on protective clothing selection is the responsibility of the buyer, safety professional, industrial hygienist and end-user. DuPont de Nemours, Inc. or its affiliates DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR ANY INFORMATION OR SUGGESTIONS PROVIDED BY THE TOOL OR THE USE THEREOF.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will be unsuitable. It is the responsibility of the user to review available data and verify that the garment selected is appropriate for the intended use and meets all specified government and industry standards.
Search by :
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical or Other Hazard Name
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Hazard Concentration information
Please read following
- You have selected a chemical that has been tested at multiple concentrations. All concentrations will be displayed on the next page so that you can review breakthrough times for each concentration.
- Please review FAQs if your hazard concentration is lower or higher than the tested concentrations
Need Help?
- If you see your CAS number in the drop down list, make sure you are selecting the hazard from the drop down list before clicking "Add to List".
- If you do not see your CAS number listed, check the number and try again or you may want to try Guide.
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 2 of 3
CHEMICAL COMPARISON
The table below shows the Normalized Breakthrough times of fabrics for the hazards selected. (Testing Details) You can find specific garments that protect against these hazards by clicking the 'Next' button below.
Done
Done
Done
TYVEK
|
TYCHEM
|
GLOVES
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 3 of 3
Flammable Environments
WARNING
If any of the following apply:
- A fire or electric arc is actively present in the work environment
- The work environment contains an uncontrollable flammable material between the Lower Explosive Limit (LEL) or Lower Flammable Limit (LFL) and the Upper Explosive Limit (UEL) or Upper Flammable Limit (UFL)
- The work environment has been subject to a breach or loss in containment of flammable material (flammable liquids, flammable vapors or combustible dusts)
- There is an uncontrolled fuel source available in the work environment (that may or may not have encountered an ignition source yet)
Please consider fire fighter PPE (personal protective equipment). Read more.
If none of these conditions apply but FR clothing is required in your working environment, close this box and proceed to the next question. Only fabrics that provide both chemical resistance to the hazards you have listed and protection during escape from a flash fire will be considered for your hazard scenario.
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
step3of3
Is Suitable For Hazard Scenario
Is Not Suitable For Hazard Scenario
| Hazard | Fabric/Materials | Seam | Design |
|---|
Compare All
YOU MAY WANT TO CONSIDER SIMILAR PRODUCTS RELATED TO FS0127TLT00
Matching Products (0)
Your hazard scenario did not produce any results. May we suggest:
- If you are searching multiple hazards at one time, try breaking your search into separate hazards by either creating a new scenario or unchecking Hazards in the pane to the left. SafeSPEC™ is trying to find one garment that can be used for all of your hazards. You may need to consider more than one garment.
- If you have a liquid or vapor chemical hazard, try searching the Chemical Resistance Database. This database will show you permeation data for all of the fabrics tested against a given hazard. Once you are able to determine a suitable fabric, you will have the flexibility of selecting a suitable garment design and seam construction yourself.
- If you answered "yes" to the question that you are working in an environment that requires flame resistant clothing, please note that although DuPont has several garment options for scenarios involving possible industrial fire or electric arc exposures as well as chemical exposure hazards, these garments may not have been tested against the specific chemical hazard(s) that you have selected or may have breakthrough times lower than your intended work duration. If possible, try to mitigate the need for flame resistant clothing by implementing engineering controls, work practices and administrative controls before resorting to protective clothing. Additionally, try breaking your search into separate hazards as suggested above in order to find garment options to meet your needs.
- If you selected "localized to the feet" for the direction of exposure question, you may want to consider chemical resistant boots instead of purchasing a full garment. DuPont does not manufacture or sell chemical resistant boots. However, we do offer some coveralls and encapsulated suits with attached socks. These socks can be worn as an extra layer of protection inside of chemical resistant boots.
If you still need help, please Contact Us.
Is Suitable For Hazard Scenario
Is Not Suitable For Hazard Scenario
| Hazard | Fabric/Materials | Seam | Design |
|---|
Hover over image to zoom
| Name | Description |
|---|---|
| Full Part Number | FS127TLTxx0006yy (xx=size;yy=option code)  |
| Fabric/Materials | Tychem® 6000 SFR |
| Design | Coverall w/ Resp. Fit Hood, Elastic Wrists and Ankles |
| Seam | Taped |
| Color | Light Tan |
| Sizes | SM, MD, LG, XL, 2X, 3X, 4X, 5X |
| Quantity/Box | 6 per case |
| Option Codes | 00 |
Technical Data Sheet
FEATURES & PRODUCT DETAILS
- Respirator-fit hood
- Covered elastic face opening
- Covered elastic openings at wrists and ankles for tighter fit
- Elastic at sides of waist for better fit
- Chin flap with double-sided adhesive tape
- Double storm flap covers zipper which can be sealed by the wearer with double-sided adhesive strip to prevent intrusion at zipper.
- Taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered with a strip of compatible chemical-resistant material through heat sealing.
- Nylon zipper with large metal pull
- Pin lock zipper prevents movement of the slider when puller is in the down position, helping to prevent garment from unzipping while performing work.
- Manufactured under specifications that do not contain natural rubber latex
- Meets the U.S. industry requirements for blood (ASTM F1670) and viral penetration (ASTM F1671) protecting against several bloodborne pathogen exposure risks.
ADDITIONAL EQUIPMENT NEEDED
- Please read, understand and follow the Tychem® User Manual.
- Tychem® 6000 SFR garments provide only secondary flame-resistant protection. They must always be worn over appropriate primary flame-resistant protective clothing in an environment that needs flame protection, along with other personal protective equipment that protects your face, hands, and feet. For Tychem® 6000 SFR hooded garments, a primary flame-resistant hood/balaclava should be worn.
- Wear other appropriate PPE such as, but not limited to, respiratory, eye, head, hand, and foot protection based on the hazard assessment.
FINISHED DIMENSIONS
| Size | Sleeve Length | Chest Width | Inseam | Fits Chest | Fits Height |
|---|---|---|---|---|---|
| SM | 35 1/2 | 20 3/4 | 31 1/2 | 29 1/2 - 35 1/4 | 5'0" - 5'7" |
| MD | 36 1/4 | 22 3/4 | 32 | 34 1/4 - 37 3/4 | 5'3" - 5'9" |
| LG | 37 1/2 | 24 3/4 | 32 3/4 | 37 1/2 - 41 | 5'5" - 5'11" |
| XL | 38 3/4 | 26 3/4 | 33 1/4 | 40 3/4 - 44 1/4 | 5'8" - 6'2" |
| 2X | 40 | 28 3/4 | 34 | 43 3/4 - 47 1/4 | 5'10" - 6'4" |
| 3X | 41 | 30 3/4 | 34 3/4 | 47 - 50 1/2 | 6'2" - 6'6" |
AVAILABLE OPTIONS
| Option Code | Description | Sizes | Part Number |
|---|---|---|---|
| 00 | Standard | SM,MD,LG,XL,2X,3X | FS127TLTxx000600 |
SPECIFICATIONS
- The garment shall be constructed of DuPont™ Tychem® 6000 SFR-- a proprietary secondary flame-resistant (FR) chemical fabric.
- The garment shall be light tan in color.
- The garment shall be a hooded coverall design.
- The garment shall have taped seams.
- The tape used to cover the seams shall be a film composite with equal to or greater chemical resistance than the base fabric.
- The garment shall have a front zipper closure.
- The garment shall have a double storm flap and chin flap with adhesive closure.
- The garment shall have an elastic waist.
- The garment shall have covered elastic wrists.
- The garment shall have covered elastic ankles.
- The garment shall have a respirator-fit hood.
- The garment shall have a covered elastic face opening.
SIZES
| Article Number | Additional info | Product Size |
|---|---|---|
| D15577587 | MTO | SM |
| D15577588 | MTS | MD |
| D15577589 | MTS | LG |
| D15577590 | MTS | XL |
| D15577591 | MTS | 2X |
| D15577642 | MTS | 3X |
Fabric & Permeation/Penetration Data
Physical Properties
Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.
| Property | Test Method | Typical Result |
|---|---|---|
| Thickness | ASTM D1777 | 9 mils |
| Basis Weight | ASTM D3776 | 4.8 oz/yd2 |
| Tear Resistance - Trap Tear (MD) | ASTM D5587 | 11 lbf |
| Tear Resistance - Trap Tear (CD) | ASTM D5587 | 12 lbf |
| Breaking Strength - Grab (MD) | ASTM D5034 | 76 lbf |
| Breaking Strength - Grab (CD) | ASTM D5034 | 87 lbf |
| Wearing Apparel Flammability | 16 CFR 1610  |
Class 1 |
- According to EN 14325
- According to EN 14126
- According to EN 1073-2
- According to EN 14116
- According to EN 11612
- Front Tyvek ® / Back
- Based on test according to ASTM D-572
- See Instructions for Use for further information, limitations and warnings
- Larger than
- Smaller than
- Smaller than or equal to
- Not Applicable
- Standard Deviation
PERMEATION DATA
Permeation is the process by which a solid, liquid or gaseouses chemical moves through a protective clothing fabric at a molecular level. Permeation data assist in the selection of the most appropriate protective garment for a particular application and in the estimation of how long it can be safely worn. Standardised test methods are used to determine the resistance of DuPont materials to permeation, the results of which can be selected according to a specific chemical, chemical class or fabric.
| Hazard / Chemical Name | Physical State | CAS | BT Act | BT 0.1 | BT 1.0 | EN | SSPR | MDPR | Cum 480 | Time 150 | ISO |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2-(2-Butoxyethoxy) ethanol | Liquid | 112-34-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| 2-Methyl-2-Butanol | Liquid | 75-85-4 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| 2-Methyl-4-isothiazolin-3-one (20%) | Liquid | 2682-20-4 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Acetaldehyde | Liquid | 75-07-0 | imm | imm | 13*/23 | 1 | 2 | 0.06 | |||
| Acetic acid (>95%) | Liquid | 64-19-7 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| Acetic acid 2 ethoxy ethyl ester | Liquid | 111-15-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Acetic acid 2 methoxy ethyl ester | Liquid | 110-49-6 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Acetic acid ethenyl ester | Liquid | 108-05-4 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Acetic acid ethyl ester | Liquid | 141-78-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Acetic acid pentyl ester | Liquid | 628-63-7 | >480 | >480 | >480 | 6 | 0.007 | 0.001 | <10.2 | >480 | 6 |
| Acetic anhydride | Liquid | 108-24-7 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Acetic chloride | Liquid | 75-36-5 | 155 | >480 | >480 | 6 | 0.0014 | 0.0001 | |||
| Acetone | Liquid | 67-64-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Acetone cyanohydrin | Liquid | 75-86-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Acetonitrile | Liquid | 75-05-8 | 65*/83 | 131 | >480 | 6 | <0.4 | 0.03 | <82 | >480 | 6 |
| Acetyl chloride | Liquid | 75-36-5 | 155 | >480 | >480 | 6 | 0.0014 | 0.0001 | |||
| Acroleic acid | Liquid | 79-10-7 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Acrolein | Liquid | 107-02-8 | 51*/65 | 75*/101 | >480 | 6 | <0.5 | 0.02 | 105 | >480 | 6 |
| Acrolein (10 g/m2) | Liquid | 107-02-8 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Acrylamide (50%) | Liquid | 79-06-1 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Acrylic acid | Liquid | 79-10-7 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Acrylic acid ethyl ester | Liquid | 140-88-5 | imm*/161 | imm*/162 | imm*/163 | <5 | 0.04 | ||||
| Acrylic acid n-butyl ester | Liquid | 141-32-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | >480 | >480 | 6 |
| Acrylicamide (50%) | Liquid | 79-06-1 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Acrylonitrile | Liquid | 107-13-1 | 72*/91 | 73*/92 | 103 | 3 | 8.9 | 0.0085 | |||
| Acryloyl Chloride | Liquid | 814-68-6 | 166*/224 | 334 | >480 | 6 | <0.3 | 0.04 | 29.6 | >480 | 6 |
| Adipic acid dinitrile | Liquid | 111-69-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Adipic acid nitrile | Liquid | 111-69-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Adiponitrile | Liquid | 111-69-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Allyl alcohol | Liquid | 107-18-6 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Allyl chloride | Liquid | 107-05-1 | 291*/400 | 381*/447 | >480 | 6 | <0.2 | 0.02 | <18.5 | >480 | 6 |
| Amido sulfonic acid (15%) | Liquid | 5329-14-6 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Amino benzene | Liquid | 62-53-3 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Amino diphenyl, 4- (1 mg/ml in Methanol) | Liquid | 92-67-1 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Amino ethanol, 2- | Liquid | 141-43-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Amino ethylethanolamine | Liquid | 111-41-1 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Amino ethylethanolamine (60%) | Liquid | 111-41-1 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Amino ethylpiperazine | Liquid | 140-31-8 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Amino propane, 2- | Liquid | 75-31-0 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Ammonia (-33 °C, liquid) | Liquid | 7664-41-7 | 15 | 20 | >480 | 6 | <0.89 | 0.04 | 109 | >480 | 6 |
| Ammonia (gaseous) | Vapor | 7664-41-7 | 20 | 20 | 21 | 1 | 1.5 | 0.0024 | |||
| Ammonium bifluoride (sat) | Liquid | 1341-49-7 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ammonium fluoride (40%) | Liquid | 12125-01-8 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Ammonium hydrogendifluoride (sat) | Liquid | 1341-49-7 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ammonium hydroxide (32%) | Liquid | 1336-21-6 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Amyl acetate, n- | Liquid | 628-63-7 | >480 | >480 | >480 | 6 | 0.007 | 0.001 | <10.2 | >480 | 6 |
| Amyl alcohol | Liquid | 71-41-0 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Amyl alcohol, tert- | Liquid | 75-85-4 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Amyl ester acetic acid | Liquid | 628-63-7 | >480 | >480 | >480 | 6 | 0.007 | 0.001 | <10.2 | >480 | 6 |
| Anilin, 4-Trifluoromethoxy- | Liquid | 461-82-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Aniline | Liquid | 62-53-3 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Anthracene (sat in Toluene) | Liquid | 120-12-7 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Anthracin (sat in Toluene) | Liquid | 120-12-7 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Antimony pentachloride | Liquid | 7647-18-9 | <15 | <15 | <15 | 1 | >10 | 0.1 | |||
| Arsenic (III) chloride | Liquid | 7784-34-1 | 22*/29 | 32*/38 | 59 | 2 | 334 | 0.01 | |||
| Arsenic trichloride | Liquid | 7784-34-1 | 22*/29 | 32*/38 | 59 | 2 | 334 | 0.01 | |||
| Azolidine | Liquid | 123-75-1 | 40*/80 | 45*/100 | 145*/185 | 4 | 4.7 | 0.05 | |||
| Benzaldehyde | Liquid | 100-52-7 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Benzenamine | Liquid | 62-53-3 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Benzene | Liquid | 71-43-2 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Benzene carbonyl chloride | Liquid | 98-88-4 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| Benzene sulfone chloride | Liquid | 98-09-9 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Benzene sulfonyl chloride | Liquid | 98-09-9 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Benzisothiazol 1,2- (20%) | Liquid | 2634-33-5 | >480 | >480 | >480 | 6 | <0.061 | 0.061 | <30 | >480 | 6 |
| Benzo nitrile | Liquid | 100-47-0 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Benzoyl chloride | Liquid | 98-88-4 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| Benzyl alcohol | Liquid | 100-51-6 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Benzyl chloride | Liquid | 100-44-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Benzyl cyanide | Liquid | 140-29-4 | >390 | >390 | >390 | 5 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Benzyl methylamine, N- | Liquid | 103-67-3 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Bis (4-(2,3-epoxypropoxy)phenyl)propane | Liquid | 1675-54-3 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Bis phenol A diglycidyl ether | Liquid | 1675-54-3 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Black Liquor (mix) | Liquid | mix | >480 | ||||||||
| Boron fluoride ethyl ether | Liquid | 109-63-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Boron trifluoride diethyl etherate | Liquid | 109-63-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Boron trifluoride dimethyl etherate | Liquid | 353-42-4 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Boron trifluoride etherate | Liquid | 109-63-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Brom thiophene, 2- | Liquid | 1003-09-4 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Bromine | Liquid | 7726-95-6 | imm | imm | imm | 105 | 0.001 | ||||
| Bromo 4-fluorobenzene, 1- | Liquid | 460-00-4 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Bromo fluorobenzene, 4- | Liquid | 460-00-4 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| But-3-en-2-one | Liquid | 78-94-4 | 287*/379 | >480 | >480 | 6 | <0.1 | 0.02 | <9.6 | >480 | 6 |
| Butadiene, 1,3- (gaseous) | Vapor | 106-99-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Butanal, n- | Liquid | 123-72-8 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Butanol, 1- | Liquid | 71-36-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Butanol, n- | Liquid | 71-36-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Butanol, tert- | Liquid | 75-65-0 | 10*/147 | 37*/205 | >480 | 6 | 0.26 | 0.02 | |||
| Butanone | Liquid | 78-93-3 | imm | 40*/64 | >480 | 6 | 0.36 | 0.001 | |||
| Butanone oxime, 2- | Liquid | 96-29-7 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Butenal, 2- | Liquid | 123-73-9 | 121 | 147 | >480 | 6 | <1 | 0.02 | 210 | 405 | 5 |
| Butoxy ethanol, 2- | Liquid | 111-76-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Butyl acetate, n- | Liquid | 123-86-4 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Butyl acrylate, n- | Liquid | 141-32-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | >480 | >480 | 6 |
| Butyl alcohol, n- | Liquid | 71-36-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Butyl amine | Liquid | 109-73-9 | 170 | 200 | >480 | 6 | 0.84 | 0.01 | 137.5 | >480 | 6 |
| Butyl ether, n- | Liquid | 142-96-1 | 223*/285 | 223*/285 | 224*/287 | 4 | 14.6 | 0.021 | |||
| Butyl stannium trichloride | Liquid | 1118-46-3 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Butylchloroformate | Liquid | 592-34-7 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Butyraldehyde, n- | Liquid | 123-72-8 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Butyric Acid | Liquid | 107-92-6 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Calomel (sat) | Liquid | 10112-91-1 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Carbon disulfide | Liquid | 75-15-0 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Carbon tetrachloride | Liquid | 56-23-5 | imm | imm*/11 | >480 | 6 | 0.57 | 0.001 | |||
| Carbon tetrachloride (1000 ppm) | Vapor | 56-23-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Caustic ammonia (32%) | Liquid | 1336-21-6 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Caustic soda (50% at 50 °C) | Liquid | 1310-73-2 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Caustic soda (50%) | Liquid | 1310-73-2 | >480 | >480 | >480 | 6 | <0.025 | 0.025 | <12 | >480 | 6 |
| Cellosolve acetate | Liquid | 110-80-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Chemguard S-764P14A | Liquid | mix | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <5 | >480 | 6 |
| Chlor allylene | Liquid | 107-05-1 | 291*/400 | 381*/447 | >480 | 6 | <0.2 | 0.02 | <18.5 | >480 | 6 |
| Chlor trinitromethan | Liquid | 76-06-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Chlorine (gaseous) | Vapor | 7782-50-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Chloro 1,3-butadiene, 2- (50% in Butanol) | Liquid | 126-99-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Chloro 1-methylbenzene, 2- | Liquid | 95-49-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Chloro 2,3-epoxy propane, 1- | Liquid | 106-89-8 | 355 | 395 | >480 | 6 | <0.4 | 0.02 | 18.4 | >480 | 6 |
| Chloro 2-nitrobenzene, 1- (35-40 °C, molten) | Liquid | 88-73-3 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Chloro acetic acid (80%) | Liquid | 79-11-8 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Chloro acetone (95%) | Liquid | 78-95-5 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Chloro acrylonitrile, 2- | Liquid | 920-37-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Chloro aniline, p- (70 °C, molten) | Liquid | 106-47-8 | imm | 11 | 1 | 256 | 0.0206 | ||||
| Chloro benzenamine, 4- (70 °C, molten) | Liquid | 106-47-8 | imm | 11 | 1 | 256 | 0.0206 | ||||
| Chloro benzene | Liquid | 108-90-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Chloro ethanol, 2- | Liquid | 107-07-3 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Chloro ethene | Vapor | 75-01-4 | imm | >480 | >480 | 6 | 0.02 | 0.001 | <9.6 | >480 | 6 |
| Chloro methyl methyl ether | Liquid | 107-30-2 | imm*/11 | imm*/37 | >480 | 6 | 0.75 | 0.001 | |||
| Chloro picrin | Liquid | 76-06-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Chloro prene, 3- | Liquid | 107-05-1 | 291*/400 | 381*/447 | >480 | 6 | <0.2 | 0.02 | <18.5 | >480 | 6 |
| Chloro propan-2-one, 1- (95%) | Liquid | 78-95-5 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Chloro toluene, alpha- | Liquid | 100-44-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Chloro toluene, o- | Liquid | 95-49-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Chloroacetic ethylester | Liquid | 105-39-5 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Chloroacetic ethylester (75% in Ethanol) | Liquid | 105-39-5 | >480 | ||||||||
| Chloroform | Liquid | 67-66-3 | imm | imm | imm | 10.6 | 0.001 | ||||
| Chloroform (1000 ppm) | Vapor | 67-66-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Chlorsulfonic acid | Liquid | 7790-94-5 | 423 | >480 | >480 | 6 | 0.0003 | 0.0001 | |||
| Chromic acid (CrO3) (44.9%) | Liquid | 1333-82-0 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Citric acid (sat) | Liquid | 77-92-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Creosote | Liquid | 8001-58-9 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Cresol o- | Liquid | 95-48-7 | 173 | 179 | 211 | 4 | <4 | 0.02 | 674 | 295 | 5 |
| Cresols, mixed isomers | Liquid | 1319-77-3 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Cresylic acid | Liquid | 1319-77-3 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Croton aldehyde | Liquid | 123-73-9 | 121 | 147 | >480 | 6 | <1 | 0.02 | 210 | 405 | 5 |
| Cumene | Liquid | 98-82-8 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Cyanamide (50%) | Liquid | 420-04-2 | 62*/208 | nm | >480 | 6 | na | 0.17 | <81.6 | >480 | 6 |
| Cyanobenzene | Liquid | 100-47-0 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Cyanoethylene | Liquid | 107-13-1 | 72*/91 | 73*/92 | 103 | 3 | 8.9 | 0.0085 | |||
| Cyanomethane | Liquid | 75-05-8 | 65*/83 | 131 | >480 | 6 | <0.4 | 0.03 | <82 | >480 | 6 |
| Cyanopropan-2-ol, 2- | Liquid | 75-86-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Cyclo hexane | Liquid | 110-82-7 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Cyclo hexanone | Liquid | 108-94-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Dahlgren Decon solution | Liquid | mix | >480 | >480 | >480 | 6 | <0.025 | 0.025 | <12 | >480 | 6 |
| Diamino sulfo chloride | Liquid | 13360-57-1 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Diaminoethane, 1,2- | Liquid | 107-15-3 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Dibromoethane, 1,2- | Liquid | 106-93-4 | 84*/153 | 144*/288 | >480 | 6 | 0.52 | 0.001 | |||
| Dibutyl 1,2-benzenedicarboxylate | Liquid | 84-74-2 | nm | >480 | 6 | 0.05 | |||||
| Dibutyl phthalate | Liquid | 84-74-2 | nm | >480 | 6 | 0.05 | |||||
| Dibutyl sebacate | Liquid | 109-43-3 | nm | >480 | 6 | <1 | 1 | ||||
| Dichlorbenzen, 1,2- | Liquid | 95-50-1 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Dichlorbenzen, 1,3- | Liquid | 541-73-1 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Dichlorbenzen, 1,4- (50% in Ethanol) | Liquid | 106-46-7 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Dichlorethane, 1.2.- | Liquid | 107-06-2 | 65*/83 | 93 | 109 | 3 | <3 | 0.04 | 898 | 182 | 4 |
| Dichloro -2-propanone, 1,3- (45 °C, molten) | Liquid | 534-07-6 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Dichloro acetone, 1,3- (45 °C, molten) | Liquid | 534-07-6 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Dichloro acetyl chloride | Liquid | 79-36-7 | 160 | 160 | 180 | 4 | 78.41 | 0.01 | |||
| Dichloro ethyl ether | Liquid | 111-44-4 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Dichloro ethylene, 1,1- | Liquid | 75-35-4 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Dichloro methane | Liquid | 75-09-2 | imm | imm | imm | 23.7 | 0.03 | ||||
| Dichloro methane (10.000 ppm) | Vapor | 75-09-2 | imm | 52 | >480 | 6 | <0.21 | 0.05 | 100 | >480 | 6 |
| Dichloro methane (1000 ppm) | Vapor | 75-09-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Dichloro propene, 2,3- | Liquid | 78-88-6 | imm | imm*/25 | 54*/143 | 2 | 2.4 | 0.001 | |||
| Dicyanobutane, 1,4- | Liquid | 111-69-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Diesel Fuel Grade D-2 | Liquid | mix | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Diesel fuel | Liquid | 68334-30-5 | 8*/323 | >480 | >480 | 6 | 0.02 | 0.001 | |||
| Diethyl amine | Liquid | 109-89-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Diethyl benzene (95%) | Liquid | 25340-17-4 | >480 | >480 | >480 | 6 | <0.0216 | 0.0216 | <10.4 | >480 | 6 |
| Diethyl ethanamine, N,N- | Liquid | 121-44-8 | >480 | >480 | >480 | 6 | 0.05 | 0.05 | <24 | >480 | 6 |
| Diethyl ether | Liquid | 60-29-7 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Diethyl sulfate | Liquid | 64-67-5 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Diethylene glycol monobutyl ether | Liquid | 112-34-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Diethylene triamine | Liquid | 111-40-0 | imm | >480 | >480 | 6 | <0.01 | 0.005 | <4.8 | >480 | 6 |
| Diketene Acetone (95%) | Liquid | 5394-63-8 | >480 | >480 | >480 | 6 | <0.0229 | 0.0229 | <11 | >480 | 6 |
| Dimethyl acetamide, N,N- | Liquid | 127-19-5 | >480 | >480 | >480 | 6 | <0.014 | 0.014 | <6.7 | >480 | 6 |
| Dimethyl amine | Vapor | 124-40-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Dimethyl aniline, N,N- | Liquid | 121-69-7 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Dimethyl dichlorosilane | Liquid | 75-78-5 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Dimethyl formamide, N,N- | Liquid | 68-12-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Dimethyl fumarate (27 °C, solid) | Solid | 624-49-7 | >480 | nm | >480 | 6 | <0.39 | 0.39 | |||
| Dimethyl fumarate (37 °C, solid) | Solid | 624-49-7 | >480 | nm | >480 | 6 | <0.39 | 0.39 | |||
| Dimethyl ketal | Liquid | 67-64-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Dimethyl ketone | Liquid | 67-64-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Dimethyl nitrosamine | Liquid | 62-75-9 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Dimethyl phenylamine, N,N- | Liquid | 121-69-7 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Dimethyl propandioate | Liquid | 108-59-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Dimethyl sulfate | Liquid | 77-78-1 | >480 | >480 | >480 | 6 | <0.09 | 0.09 | <43.2 | >480 | 6 |
| Dimethyl sulfide | Liquid | 75-18-3 | 83*/139 | 271 | 452 | 5 | 1.21 | 0.02 | |||
| Dimethyl sulfoxide | Liquid | 67-68-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Dimethylmalonate | Vapor | 108-59-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Dioxane, 1,4- | Liquid | 123-91-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Diphenyl methane diisocyanate, 4,4'- (50 °C, molten) | Liquid | 101-68-8 | >480 | >480 | >480 | 6 | <0.0403 | 0.0403 | <19.3 | >480 | 6 |
| Diphosgene | Liquid | 503-38-8 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Dowtherm Heat Transfer Fluid | Liquid | mix | >480 | >480 | >480 | 6 | <0.0267 | 0.0267 | <13 | >480 | 6 |
| Dytek® A | Liquid | 15520-10-2 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Epichlorohydrin | Liquid | 106-89-8 | 355 | 395 | >480 | 6 | <0.4 | 0.02 | 18.4 | >480 | 6 |
| Epoxy ethane (gaseous) | Vapor | 75-21-8 | 106 | 118 | >480 | 6 | <0.35 | 0.05 | 76 | >480 | 6 |
| Epoxy propane, 1,2- | Liquid | 75-56-9 | 41 | 43 | 51 | 2 | <5 | 0.03 | 1860 | 114 | 3 |
| Ethane 1,2-diol | Liquid | 107-21-1 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Ethane dioic acid (sat) | Liquid | 144-62-7 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethane diol dipropanoate, 1,2- | Liquid | 123-73-9 | 121 | 147 | >480 | 6 | <1 | 0.02 | 210 | 405 | 5 |
| Ethane nitrile | Liquid | 75-05-8 | 65*/83 | 131 | >480 | 6 | <0.4 | 0.03 | <82 | >480 | 6 |
| Ethane thiol | Liquid | 75-08-1 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Ethane trichloride | Liquid | 79-00-5 | 120*/173 | 164*/232 | 202*/302 | 4 | 9.1 | 0.01 | |||
| Ethanol | Liquid | 64-17-5 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Ethanol amine | Liquid | 141-43-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Ethanoyl chloride | Liquid | 75-36-5 | 155 | >480 | >480 | 6 | 0.0014 | 0.0001 | |||
| Ethansulphonic acid (70%) | Liquid | 594-45-6 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| Ethoxy ethanol, 2- | Liquid | 110-80-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethoxy ethylacetat | Liquid | 111-15-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethyl Cellosolve® | Liquid | 110-80-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethyl acetate | Liquid | 141-78-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Ethyl acrylate | Liquid | 140-88-5 | imm*/161 | imm*/162 | imm*/163 | <5 | 0.04 | ||||
| Ethyl alcohol | Liquid | 64-17-5 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Ethyl benzene | Liquid | 100-41-4 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethyl ethanamine, N- | Liquid | 109-89-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Ethyl ether | Liquid | 60-29-7 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Ethyl glycol acetate | Liquid | 111-15-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethyl hexanoic acid | Liquid | 149-57-5 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Ethyl mercaptan | Liquid | 75-08-1 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Ethyl nitrile | Liquid | 75-05-8 | 65*/83 | 131 | >480 | 6 | <0.4 | 0.03 | <82 | >480 | 6 |
| Ethylchloroformate | Liquid | 541-41-3 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Ethylene carboxylic acid | Liquid | 79-10-7 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Ethylene chlorohydrin | Liquid | 107-07-3 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Ethylene diamine | Liquid | 107-15-3 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethylene dibromide | Liquid | 106-93-4 | 84*/153 | 144*/288 | >480 | 6 | 0.52 | 0.001 | |||
| Ethylene dichloride | Liquid | 107-06-2 | 65*/83 | 93 | 109 | 3 | <3 | 0.04 | 898 | 182 | 4 |
| Ethylene glycol | Liquid | 107-21-1 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Ethylene glycol mono ethyl ether acetate | Liquid | 111-15-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethylene glycol monobutyl ether | Liquid | 111-76-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Ethylene glycol monoethyl ether | Liquid | 110-80-5 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethylene glycol monomethyl ether | Liquid | 109-86-4 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethylene glycol monomethyl ether acetate | Liquid | 110-49-6 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Ethylene oxide (gaseous) | Vapor | 75-21-8 | 106 | 118 | >480 | 6 | <0.35 | 0.05 | 76 | >480 | 6 |
| Ethylene tetrachloride | Liquid | 127-18-4 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Ethylene trichloride | Liquid | 79-01-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Ferric (II) chloride (sat) | Liquid | 7758-94-3 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Ferric (III) chloride (40%) | Liquid | 7705-08-0 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Fluorobenzene | Liquid | 462-06-6 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Fluorosilicic acid (33-35%) | Liquid | 16961-83-4 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Fluorosulfonic acid | Liquid | 7789-21-1 | 87 | 194 | >480 | 6 | na | 0.02 | 29 | >480 | 6 |
| Formaldehyde (37%) | Liquid | 50-00-0 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Formalin (37% (10-15% Methanol)) | Liquid | 50-00-0 | >480 | >480 | >480 | 6 | <0.0048 | 0.0048 | <2.3 | >480 | 6 |
| Formalin (37%) | Liquid | 50-00-0 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Formic acid (50%) | Liquid | 64-18-6 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Formic acid (>95%) | Liquid | 64-18-6 | 172 | 260 | >480 | 6 | 0.24 | 0.001 | |||
| Furaldehyde, 2- | Liquid | 98-01-1 | 459 | >480 | >480 | 6 | na | 0.03 | <14.4 | >480 | 6 |
| Furan | Liquid | 110-00-9 | 75 | 97 | >480 | 6 | <1 | 0.02 | 206 | 411 | 5 |
| Furfural | Liquid | 98-01-1 | 459 | >480 | >480 | 6 | na | 0.03 | <14.4 | >480 | 6 |
| Gasoline, leaded | Liquid | mix | imm | imm*/21 | 0.32 | 0.001 | |||||
| Gasoline, unleaded | Liquid | 86290-81-5 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Glutaral (50%) | Liquid | 111-30-8 | 150 | 170 | 200 | 4 | 1.861 | 0.01 | |||
| Glutaraldehyde (50%) | Liquid | 111-30-8 | 150 | 170 | 200 | 4 | 1.861 | 0.01 | |||
| Glycol alcohol | Liquid | 107-21-1 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Glycol chlorohydrin | Liquid | 107-07-3 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Green Liquor (mix) | Liquid | mix | >480 | ||||||||
| Heptane | Liquid | 142-82-5 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Hexamethylene diamine (45 °C, molten) | Liquid | 124-09-4 | 423 | >480 | >480 | 6 | 0.003 | 0.0001 | <1.4 | >480 | 6 |
| Hexamethylene diisocyanate | Liquid | 822-06-0 | >480 | >480 | >480 | 6 | <0.0271 | 0.0271 | <13 | >480 | 6 |
| Hexane, n- | Liquid | 110-54-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Hexanone | Liquid | 108-94-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Hexone | Liquid | 108-10-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Hexyl chloro formate, 2- | Liquid | 6092-54-2 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| Hydrazine | Liquid | 302-01-2 | 269 | 283 | 352 | 5 | 2.3 | 0.001 | |||
| Hydriodic acid (55-57%) | Liquid | 10034-85-2 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Hydrobromic acid (48%) | Liquid | 10035-10-6 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Hydrochloric acid (37%) | Liquid | 7647-01-0 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Hydrofluoric acid (48-51%) | Liquid | 7664-39-3 | >480 | >480 | >480 | 6 | <0.025 | 0.025 | <12 | >480 | 6 |
| Hydrofluoric acid (60%) | Liquid | 7664-39-3 | 18 | 52 | 373 | 5 | na | 0.005 | |||
| Hydrofluoric acid (70%) | Liquid | 7664-39-3 | 22 | 35 | 293 | 5 | na | 0.005 | 414 | 227 | 4 |
| Hydrogen bromide (gaseous) | Vapor | 10035-10-6 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Hydrogen chloride (gaseous) | Vapor | 7647-01-0 | >480 | 392 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Hydrogen fluoride (20-27 °C, gaseous) | Vapor | 7664-39-3 | imm | imm | 23 | 1 | na | 0.05 | |||
| Hydrogen peroxide (50%) | Liquid | 7722-84-1 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Hydrogen peroxide (70%) | Liquid | 7722-84-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Hydroxy 1,2,3-propanetricarboxylic acid, 2- (sat) | Liquid | 77-92-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Hydroxy 1-ethanethiol, 2- | Liquid | 60-24-2 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| Hydroxy 2-methylpropionitrile, 2- | Liquid | 75-86-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Hydroxy isobutyronitrile | Liquid | 75-86-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Hydroxy toluene | Liquid | 100-51-6 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Hydroxy toluene, o- | Liquid | 95-48-7 | 173 | 179 | 211 | 4 | <4 | 0.02 | 674 | 295 | 5 |
| Hypophosphorus acid (50%) | Liquid | 6303-21-5 | >480 | >480 | >480 | 6 | <0.09 | 0.09 | <43.2 | >480 | 6 |
| Iodomethane | Liquid | 74-88-4 | 254 | 296 | >480 | 6 | na | 0.07 | 53.6 | >480 | 6 |
| Isobutyl methyl ketone | Liquid | 108-10-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Isophthaloyldichloride (45 °C, molten) | Liquid | 99-63-8 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Isopropanol | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Isopropyl alcohol | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Isopropyl amine | Liquid | 75-31-0 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Isopropyl benzene | Liquid | 98-82-8 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Isopropyl bromoacetate (>95%) | Liquid | 29921-57-1 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Isopropylidenediphenol diglycidyl ether, 4,4'- | Liquid | 1675-54-3 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Kerosene | Liquid | 8008-20-6 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Ketone propane | Liquid | 67-64-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Lewisite (L), FINABEL 0.7.C | Liquid | 541-25-3 | >1558 | >1558 | |||||||
| Lewisite (L), MIL-STD-282 (100 g/m2) | Liquid | 541-25-3 | 3608 | ||||||||
| Limonene d- | Liquid | 5989-27-5 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| MEK | Liquid | 78-93-3 | imm | 40*/64 | >480 | 6 | 0.36 | 0.001 | |||
| Maleic anhydride (66 °C, molten) | Liquid | 108-31-6 | 21 | 22 | 24 | 1 | 24.6 | 0.016 | |||
| Mercapto acetic acid | Liquid | 68-11-1 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Mercapto ethanol | Liquid | 60-24-2 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| Mercuric I chloride (sat) | Liquid | 10112-91-1 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Mercury | Liquid | 7439-97-6 | >480 | >480 | >480 | 6 | <0.09 | 0.09 | <43.2 | >480 | 6 |
| Methacrylic acid | Liquid | 79-41-4 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Methanesulfonyl chloride | Liquid | 124-63-0 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Methanesulphonic acid | Liquid | 75-75-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methanethiol | Vapor | 74-93-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methanol | Liquid | 67-56-1 | 56 | 117 | >480 | 6 | 0.14 | 0.02 | |||
| Methoxy 2-methylpropane, 2- | Liquid | 1634-04-4 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Methoxy chloromethane | Liquid | 107-30-2 | imm*/11 | imm*/37 | >480 | 6 | 0.75 | 0.001 | |||
| Methoxy ethanol, 2 | Liquid | 109-86-4 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Methoxy ethylacetate, 2- | Liquid | 110-49-6 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Methyl -2-pyridyl acetate | Liquid | 1658-42-0 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methyl 1,5-pentantedinitrile, 2- | Liquid | 4553-62-2 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Methyl 2-methyl-2-propenoate | Liquid | 80-62-6 | imm*/26 | imm*/53 | 1.4 | 0.001 | |||||
| Methyl 2-pyrrolidon, N- | Liquid | 872-50-4 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Methyl 4-isopropenyl-1-cyclohexene, 1- | Liquid | 5989-27-5 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Methyl Ethyl Ketone Peroxide (35%) | Liquid | 1338-23-4 | >480 | >480 | >480 | 6 | <0.018 | 0.018 | <10 | >480 | 6 |
| Methyl N-nitrosomethanamine, N- | Liquid | 62-75-9 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Methyl acetyl | Liquid | 67-64-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Methyl acrolein | Liquid | 123-73-9 | 121 | 147 | >480 | 6 | <1 | 0.02 | 210 | 405 | 5 |
| Methyl acrylate | Liquid | 96-33-3 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Methyl amine (gaseous) | Vapor | 74-89-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methyl aniline, o- | Liquid | 95-53-4 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Methyl benzol | Liquid | 108-88-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methyl benzylamine, N- | Liquid | 103-67-3 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Methyl chloride (gaseous) | Vapor | 74-87-3 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Methyl chloro formate | Liquid | 79-22-1 | 99*/175 | 204*/308 | >480 | 6 | 0.17 | 0.05 | <24 | >480 | 6 |
| Methyl cyanide | Liquid | 75-05-8 | 65*/83 | 131 | >480 | 6 | <0.4 | 0.03 | <82 | >480 | 6 |
| Methyl ethyl ketone | Liquid | 78-93-3 | imm | 40*/64 | >480 | 6 | 0.36 | 0.001 | |||
| Methyl ethyl ketoxime | Liquid | 96-29-7 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Methyl formamide, N- | Liquid | 123-39-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methyl hydrazine | Liquid | 60-34-4 | 83*/206 | 183*/283 | 280*/413 | 5 | 0.98 | 0.01 | |||
| Methyl imidazole, 1- | Liquid | 616-47-7 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Methyl iodide | Liquid | 74-88-4 | 254 | 296 | >480 | 6 | na | 0.07 | 53.6 | >480 | 6 |
| Methyl isocyanate | Liquid | 624-83-9 | imm | imm | 0.42 | 0.001 | |||||
| Methyl ketone | Liquid | 67-64-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Methyl mercaptan | Vapor | 74-93-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methyl methacrylate | Liquid | 80-62-6 | imm*/26 | imm*/53 | 1.4 | 0.001 | |||||
| Methyl pentan-2-one, 4- | Liquid | 108-10-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methyl phenols | Liquid | 1319-77-3 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Methyl propan-2-ol, 2- | Liquid | 75-65-0 | 10*/147 | 37*/205 | >480 | 6 | 0.26 | 0.02 | |||
| Methyl propenoic acid, 2- | Liquid | 79-41-4 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Methyl pyridine, 2- | Liquid | 109-06-8 | >480 | >480 | >480 | 6 | <0.024 | 0.024 | <11.5 | >480 | 6 |
| Methyl pyridine, 3- | Liquid | 108-99-6 | >480 | >480 | >480 | 6 | <0.024 | 0.024 | <11.5 | >480 | 6 |
| Methyl tert-butyl ether | Liquid | 1634-04-4 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Methyl trichlorosilane | Liquid | 75-79-6 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Methyl vinyl ketone | Liquid | 78-94-4 | 287*/379 | >480 | >480 | 6 | <0.1 | 0.02 | <9.6 | >480 | 6 |
| Methylen Isocyclohexylamine, 4,4- (40 °C) | Liquid | 1761-71-3 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Methylene bromide | Liquid | 74-95-3 | imm | imm | 20 | 1 | 111 | 0.05 | |||
| Methylene chloride | Liquid | 75-09-2 | imm | imm | imm | 23.7 | 0.03 | ||||
| Methylene chloride (10.000 ppm) | Vapor | 75-09-2 | imm | 52 | >480 | 6 | <0.21 | 0.05 | 100 | >480 | 6 |
| Methylene chloride (1000 ppm) | Vapor | 75-09-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Methylene diphenyl diisocyanate, 4,4'- (50 °C, molten) | Liquid | 101-68-8 | >480 | >480 | >480 | 6 | <0.0403 | 0.0403 | <19.3 | >480 | 6 |
| Naphthalene | Solid | 91-20-3 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Naphthalene (25% in Diethylene glycol dimethylether) | Liquid | 91-20-3 | >480 | >480 | >480 | 6 | <0.007 | 0.007 | <3.4 | >480 | 6 |
| Neoprene (50% in Butanol) | Liquid | 126-99-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Nicotine | Liquid | 54-11-5 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Nitric acid (70%) | Liquid | 7697-37-2 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Nitric acid (>95%) | Liquid | 7697-37-2 | 14*/19 | 46 | 65*/82 | 3 | <8 | <0.03 | 34/90 min | 134 | 4 |
| Nitric acid, red fuming (90%) | Liquid | 52583-42-3 | imm | imm*/10 | 32 | 2 | na | 0.08 | 342/80 min | 59 | 2 |
| Nitro benzene | Liquid | 98-95-3 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Nitro chlormethan | Liquid | 76-06-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Nitro methane | Liquid | 75-52-5 | 157 | 233 | 0.97 | 0.001 | |||||
| Nitro propane, 2- | Liquid | 79-46-9 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Nitro toluene, 2- | Liquid | 88-72-2 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Nitrogen dioxide | Vapor | 10102-44-0 | <15 | <15 | >0.2 | 0.01 | |||||
| Norflurane | Vapor | 811-97-2 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Octyl chlor formiate | Liquid | 7452-59-7 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Oleum (20% free SO3) | Liquid | 8014-95-7 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Oleum (40% free SO3) | Liquid | 8014-95-7 | 130*/220 | 455*/468 | >480 | 6 | 0.32 | 0.0001 | |||
| Oleum (65% free SO3) | Liquid | 8014-95-7 | 180 | 248 | 370 | 5 | na | 0.04 | 398 | 428 | 5 |
| Oxalic acid (sat) | Liquid | 144-62-7 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| PCB in transformer oil (mix) | Liquid | mix | 324*/428 | >480 | >480 | 6 | 0.032 | 0.01 | |||
| Pentachloroantimony | Liquid | 7647-18-9 | <15 | <15 | <15 | 1 | >10 | 0.1 | |||
| Pentanedial, 1,5- (50%) | Liquid | 111-30-8 | 150 | 170 | 200 | 4 | 1.861 | 0.01 | |||
| Pentanoic acid | Liquid | 109-52-4 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Pentanol, 1- | Liquid | 71-41-0 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Pentanol, tert- | Liquid | 75-85-4 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Pentene nitrile, 2- | Liquid | 13284-42-9 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Pentyl acetate | Liquid | 628-63-7 | >480 | >480 | >480 | 6 | 0.007 | 0.001 | <10.2 | >480 | 6 |
| Peracetic Acid (32%) | Liquid | 79-21-0 | >480 | >480 | >480 | 6 | <0.0123 | 0.0123 | <6 | >480 | 6 |
| Perchloric acid (70%) | Liquid | 7601-90-3 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Phenethylene | Liquid | 100-42-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Phenol (45 °C, molten) | Liquid | 108-95-2 | 22 | 25 | 29 | 1 | na | 0.05 | >355, 120 min | 56 | 2 |
| Phenol (60 °C, molten) | Liquid | 108-95-2 | imm | imm | imm | na | 0.01 | 426/24 min | 14 | 1 | |
| Phenol (85%) | Liquid | 108-95-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Phenyl acetonitrile | Liquid | 140-29-4 | >390 | >390 | >390 | 5 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Phenyl amine | Liquid | 62-53-3 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Phenyl chlor formiate | Liquid | 1885-14-9 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Phenyl chloride | Liquid | 108-90-7 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Phenyl cyanide | Liquid | 100-47-0 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Phenyl ethane | Liquid | 100-41-4 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Phenyl ethanol, 1- | Liquid | 98-85-1 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Phenyl propane, 2- | Liquid | 98-82-8 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Phenyl trichlorosilane | Liquid | 98-13-5 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Phosgene | Vapor | 75-44-5 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Phosphine | Vapor | 7803-51-2 | imm | imm | >0.11 | 0.003 | |||||
| Phosphinic acid (50%) | Liquid | 6303-21-5 | >480 | >480 | >480 | 6 | <0.09 | 0.09 | <43.2 | >480 | 6 |
| Phosphoric acid (85%) | Liquid | 7664-38-2 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Phosphorus oxychloride | Liquid | 10025-87-3 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 | |
| Phosphorus trichloride | Liquid | 2125683 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Picoline, 2- | Liquid | 109-06-8 | >480 | >480 | >480 | 6 | <0.024 | 0.024 | <11.5 | >480 | 6 |
| Picoline, 3- | Liquid | 108-99-6 | >480 | >480 | >480 | 6 | <0.024 | 0.024 | <11.5 | >480 | 6 |
| Pimelic ketone | Liquid | 108-94-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Polymethylene polyphenyle isocyanate (p-MDI) | Liquid | 9016-87-9 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Potassium acetate (sat) | Liquid | 127-08-2 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Potassium chromate (sat) | Liquid | 7789-00-6 | >480 | >480 | >480 | 6 | <0.08 | 0.08 | <38.4 | >480 | 6 |
| Potassium hydroxide (45%) | Liquid | 1310-58-3 | >480 | >480 | >480 | 6 | <0.023 | 0.023 | <11 | >480 | 0 |
| Potassium hydroxide (50%) | Liquid | 1310-58-3 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Prop-2-en-1-al | Liquid | 107-02-8 | 51*/65 | 75*/101 | >480 | 6 | <0.5 | 0.02 | 105 | >480 | 6 |
| Prop-2-en-1-al (10 g/m2) | Liquid | 107-02-8 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Prop-2-yn-1-ol | Liquid | 107-19-7 | 123 | 123 | 127 | 4 | 37.9 | 0.07 | |||
| Propan -1-ol | Liquid | 71-23-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Propan -2-ol | Liquid | 67-63-0 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Propan -2-one | Liquid | 67-64-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Propanoic acid | Liquid | 79-09-4 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Propanol, 1- | Liquid | 71-23-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Propanol, n- | Liquid | 71-23-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Propargyl alcohol | Liquid | 107-19-7 | 123 | 123 | 127 | 4 | 37.9 | 0.07 | |||
| Propen 1-ol, 2- | Liquid | 107-18-6 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Propenamide (50%) | Liquid | 79-06-1 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Propene acid | Liquid | 79-10-7 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Propenenitrile, 2- | Liquid | 107-13-1 | 72*/91 | 73*/92 | 103 | 3 | 8.9 | 0.0085 | |||
| Propenoic acid butyl ester, 2- | Liquid | 141-32-2 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | >480 | >480 | 6 |
| Propenoic acid nitrile | Liquid | 107-13-1 | 72*/91 | 73*/92 | 103 | 3 | 8.9 | 0.0085 | |||
| Propychloroformate | Liquid | 109-61-5 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Propyl alcohol | Liquid | 71-23-8 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Propyl amine, n- | Liquid | 107-10-8 | imm | 16*/21 | >480 | 6 | 0.52 | 0.05 | |||
| Propyl bromide, n- | Liquid | 106-94-5 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Propylene aldehyde | Liquid | 123-73-9 | 121 | 147 | >480 | 6 | <1 | 0.02 | 210 | 405 | 5 |
| Propylene oxide, 1,2- | Liquid | 75-56-9 | 41 | 43 | 51 | 2 | <5 | 0.03 | 1860 | 114 | 3 |
| Pyridene, 2-fluoro-6-(trifluoromethyl) | Liquid | 94239-04-0 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Pyridine | Liquid | 110-86-1 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Pyroacetic ether | Liquid | 67-64-1 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Pyrrolidine | Liquid | 123-75-1 | 40*/80 | 45*/100 | 145*/185 | 4 | 4.7 | 0.05 | |||
| Sarin (GB), FINABEL 0.7.C | Liquid | 107-44-8 | >14008 | ||||||||
| Sarin (GB), MIL-STD-282 (100 g/m2) | Liquid | 107-44-8 | >4808 | ||||||||
| Silane | Vapor | 7803-62-5 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Silicon tetrachloride | Liquid | 10026-04-7 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Sodium bisulphite (38-40%) | Liquid | 7631-90-5 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Sodium cyanide (45%) | Liquid | 143-33-9 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Sodium cyanide (sat) | Liquid | 143-33-9 | >480 | >480 | >480 | 6 | <0.07 | 0.07 | <33.6 | >480 | 6 |
| Sodium hydroxide (50% at 50 °C) | Liquid | 1310-73-2 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Sodium hydroxide (50%) | Liquid | 1310-73-2 | >480 | >480 | >480 | 6 | <0.025 | 0.025 | <12 | >480 | 6 |
| Sodium hypochlorite (15%) | Liquid | 7681-52-9 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Soman (GD), FINABEL 0.7.C | Liquid | 96-64-0 | >14008 | ||||||||
| Soman (GD), MIL-STD-282 (100 g/m2) | Liquid | 96-64-0 | >4808 | ||||||||
| Spiritus | Liquid | 64-17-5 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Styrene | Liquid | 100-42-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Sulfamic acid (15%) | Liquid | 5329-14-6 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Sulfamidic acid (15%) | Liquid | 5329-14-6 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Sulfur Mustard (HD), FINABEL 0.7.C | Liquid | 505-60-2 | >14008 | ||||||||
| Sulfur Mustard (HD), MIL-STD-282 (100 g/m2) | Liquid | 505-60-2 | >4808 | ||||||||
| Sulfur dioxide | Vapor | 2025884 | 28*/46 | 28*/46 | >480 | 6 | <0.5 | 0.1 | <94 | >480 | 6 |
| Sulfuric acid (98% at 50 °C) | Liquid | 7664-93-9 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Sulfuric acid (>95%) | Liquid | 7664-93-9 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Sulfuric acid diethyl ester | Liquid | 64-67-5 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Sulfuric acid dimethyl ester | Liquid | 77-78-1 | >480 | >480 | >480 | 6 | <0.09 | 0.09 | <43.2 | >480 | 6 |
| Sulfuric acid fuming (20% free SO3) | Liquid | 8014-95-7 | >480 | >480 | >480 | 6 | <0.06 | 0.06 | <28.8 | >480 | 6 |
| Sulfuric acid fuming (40% free SO3) | Liquid | 8014-95-7 | 130*/220 | 455*/468 | >480 | 6 | 0.32 | 0.0001 | |||
| Sulfuric acid fuming (65% free SO3) | Liquid | 8014-95-7 | 180 | 248 | 370 | 5 | na | 0.04 | 398 | 428 | 5 |
| Sulfuryl chloride | Liquid | 7791-25-5 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Tabun (GA), FINABEL 0.7.C | Liquid | 77-81-6 | >14008 | ||||||||
| Tabun (GA), MIL-STD-282 (100 g/m2) | Liquid | 77-81-6 | >4808 | ||||||||
| Tetrachloro bisphenol-A, 2,2',6,6'- | Solid | 79-95-8 | >480 | >480 | >480 | 6 | <0.1 | 0.1 | <48 | >480 | 6 |
| Tetrachloro ethane, 1,1,2,2,- | Liquid | 79-34-5 | >480 | >480 | >480 | 6 | <0.008 | 0.008 | <3.8 | >480 | 6 |
| Tetrachloro ethylene, 1,1,2,2- | Liquid | 127-18-4 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Tetrachloro methane | Liquid | 56-23-5 | imm | imm*/11 | >480 | 6 | 0.57 | 0.001 | |||
| Tetrachloro methane (1000 ppm) | Vapor | 56-23-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Tetraethylene pentamine | Liquid | 112-57-2 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Tetrafluoroethane, 1,1,1,2- | Vapor | 811-97-2 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Tetrahydrofuran | Liquid | 109-99-9 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Tetramethyl ammonium hydroxide (25%) | Liquid | 75-59-2 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Thiazol, 1,3- | Liquid | 288-47-1 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Thioalkohol | Liquid | 75-08-1 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Thioglycolic acid | Liquid | 68-11-1 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Thionyl chloride | Liquid | 2125597 | 21 | 21 | 33 | 2 | nm | 0.1 | nm | 47 | 2 |
| Thiophene | Liquid | 110-02-1 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Tin chloride, mono-n-butyl | Liquid | 1118-46-3 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Tin chloride, tri-n-butyl | Liquid | 1461-22-9 | nm | >480 | 6 | nm | 0.2 | ||||
| Titan(IV) chloride | Liquid | 7550-45-0 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Titanium tetrachloride | Liquid | 7550-45-0 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Toluene | Liquid | 108-88-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Toluene diisocyanate, 2,4- | Liquid | 584-84-9 | >480 | >480 | >480 | 6 | <0.0281 | 0.0281 | <13.5 | >480 | 6 |
| Toluene diisocyanate, 2,4- (80%) | Liquid | 584-84-9 | >480 | >480 | >480 | 6 | <0.0281 | 0.0281 | <13.5 | >480 | 6 |
| Toluidine, o- | Liquid | 95-53-4 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Tributyl amine (95%) | Liquid | 102-82-9 | >480 | >480 | >480 | 6 | <0.04 | 0.04 | <19.2 | >480 | 6 |
| Trichloro acetic acid (sat) | Liquid | 76-03-9 | >480 | >480 | >480 | 6 | <0.03 | 0.03 | <14.4 | >480 | 6 |
| Trichloro acetone, 1,1,3- (87.7%) | Liquid | 921-03-9 | 431*/458 | 467*/476 | >480 | 6 | <0.2 | 0.05 | <24 | >480 | 6 |
| Trichloro benzene, 1,2,4- | Liquid | 120-82-1 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Trichloro ethane, 1,1,2- | Liquid | 79-00-5 | 120*/173 | 164*/232 | 202*/302 | 4 | 9.1 | 0.01 | |||
| Trichloro ethanol, 2,2,2- | Liquid | 115-20-8 | >480 | >480 | >480 | 6 | <0.008 | 0.008 | <3.8 | >480 | 6 |
| Trichloro ethylene | Liquid | 79-01-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Trichloro methane | Liquid | 67-66-3 | imm | imm | imm | 10.6 | 0.001 | ||||
| Trichloro methane (1000 ppm) | Vapor | 67-66-3 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Trichloro phenylsilane | Liquid | 98-13-5 | >480 | >480 | >480 | 6 | <0.0001 | 0.0001 | <0.04 | >480 | 6 |
| Triethyl amine | Liquid | 121-44-8 | >480 | >480 | >480 | 6 | 0.05 | 0.05 | <24 | >480 | 6 |
| Triethylentetramine (60%) | Liquid | 112-24-3 | >480 | >480 | >480 | 6 | <0.005 | 0.005 | <2.4 | >480 | 6 |
| Trifluoro acetic acid | Liquid | 76-05-1 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Trifluoro methansulfonic acid | Liquid | 1493-13-6 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Trimethyl chinon (30 °C, molten) | Liquid | 935-92-2 | nm | >480 | 6 | nm | 0.05 | ||||
| VX Nerve Agent, FINABEL 0.7.C | Liquid | 50782-69-9 | >14008 | ||||||||
| VX Nerve Agent, MIL-STD-282 (100 g/m2) | Liquid | 50782-69-9 | >4808 | ||||||||
| Vinyl acetate | Liquid | 108-05-4 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Vinyl benzol | Liquid | 100-42-5 | >480 | >480 | >480 | 6 | <0.05 | 0.05 | <24 | >480 | 6 |
| Vinyl carbinol | Liquid | 107-18-6 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Vinyl chloride | Vapor | 75-01-4 | imm | >480 | >480 | 6 | 0.02 | 0.001 | <9.6 | >480 | 6 |
| Vinyl cyanide | Liquid | 107-13-1 | 72*/91 | 73*/92 | 103 | 3 | 8.9 | 0.0085 | |||
| Vinyl ethylene (gaseous) | Vapor | 106-99-0 | >480 | >480 | >480 | 6 | <0.01 | 0.01 | <4.8 | >480 | 6 |
| Vinylidene chloride | Liquid | 75-35-4 | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| White Liquor | Liquid | mix | >480 | ||||||||
| White spirit | Liquid | mix | >480 | >480 | >480 | 6 | <0.02 | 0.02 | <9.6 | >480 | 6 |
| Xylene, mixed isomers | Liquid | 1330-20-7 | >480 | >480 | >480 | 6 | <0.001 | 0.001 | <0.48 | >480 | 6 |
| Xylidine, 2,4- | Liquid | 95-68-1 | >480 | >480 | >480 | 6 | <0.0195 | 0.0195 | <9.4 | >480 | 6 |
View by:
✕
✕
To access secured content from DuPont Please Sign In or Sign Up below