Tyvek / Tychem® ThermoPro

TP0275TORCE

Tychem® ThermoPro

DuPont™ Tychem® Apron. Sleved Apron. Elasticated wrists. Adjustable FR buckles at back. Orange.

 
 
 
Hover over image to zoom

CATIII

T3

T4

T6

EN 1149-5

EN 14116

EN 11612

IEC 61482

Name Description
Full Part Number TP0275TORCE
Fabric / Material Tychem® 6000 FR
Design Sleeved Apron with rear closure
Seam Stitched and over-taped
Color Bright orange
Sizes SM,MD,LG,XL,2X,3X
Quantity/Box 2 per box

FEATURES & PRODUCT DETAILS

DuPont™ Tychem® ThermoPro Apron. Sleeved apron available in bright orange and in sizes SM to 3X. Adjustable FR buckles at back of waist and shoulder. Integral sleeves with elasticated wrists. Sewn with DuPont™ Nomex® thread
Tychem® ThermoPro accessories provide partial body protection and must be used in conjunction with primary flame resistance clothing that is rated for the fire/arc hazard.
Tychem® ThermoPro provides triple hazard protection from liquid-chemical splash, flash fire and electric arc in a single layer. They combine the trusted chemical protection of Tychem® and thermal/arc protection of Nomex® to help provide industrial workers and HazMat responders with permeation protection against a broad range of toxic industrial chemicals and to provide escape time from flash fires. Ideal for laboratories or for use on top of an existing flame resistant (FR) garments where extra chemical protection is required.

  • Partial body chemical protective clothing, Category III, Type PB [3-B]
  • Inherently antistatic (EN 1149-5) - on inside
  • EN ISO 11612 (heat and flame), EN ISO 14116 (limited flame spread), IEC 61482-2 (electric arc)
  • Stitched and over-taped seams with barrier tape for protection and strength

SIZES

Fabric & Permeation/Penetration Data

Physical Properties

Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and puncture resistance can help in the assessment of protective performance.

Property Test Method Typical Result EN
Abrasion Resistance 7 EN 530 Method 2 >2000 cycles 6 of 6 1
Basis Weight DIN EN ISO 536 280 g/m2 N/A
Charge decay, inside 7 EN 1149-3 t< 50<4s or S>0.2, Pass 14 N/A
Charge decay, outside 7 EN 1149-3 No decay, outside N/A
Colour N/A Orange N/A
Flex Cracking Resistance 7 EN ISO 7854 Method B >1000 cycles 1 of 6 1
Flex Cracking Resistance at -30 °C EN ISO 7854 Method B >4000 cycles 6 of 6 1
Puncture Resistance EN 863 >10 N 2 of 6 1
Tensile Strength (MD) DIN EN ISO 13934-1 >500 N 5 of 6 1
Tensile Strength (XD) DIN EN ISO 13934-1 >500 N 5 of 6 1
Thickness DIN EN ISO 534 860 µm N/A
Trapezoidal Tear Resistance (MD) EN ISO 9073-4 >100 N 5 of 6 1
Trapezoidal Tear Resistance (XD) EN ISO 9073-4 >100 N 5 of 6 1
  •  According to EN 14325
  •  According to EN 14126
  •  According to EN 1073-2
  •  According to EN 14116
  •   According to EN 11612
  •  Front Tyvek ® / Back
  •  Based on test according to ASTM D-572
  •  See Instructions for Use for further information, limitations and warnings
  •  Larger than
  •  Smaller than
  •  Not Applicable
  •  Standard Deviation

GARMENT PERFORMANCE

PERMEATION DATA

PENETRATION AND REPELLENCY

BIOLOGICAL BARRIER

HEAT AND FLAME, ARC

WELDING AND ALLIED PROCESSES

Warnings